	USB9560SC2 (Smart Card Reader module)

Introduction:
The USB9560SC2 single smart card reader module is designed for securing network access, The reader is suitable for Embedded system with USB 5pin standard header connecter.

USB9560SC2 can be generally applied to Smart Card read/write terminal device, such as ATM, POS terminal, Public telephone, E-Commerce, personal consumption on Internet, personal certification, prepay system, loyalty system…etc.

Support EMV Level 1 specification
Support USB 2.0 full speed
Based on ISO7816 implementation
Support PC Smart Card industry standard – PC/SC 2.0
Support Microsoft Smart Card for Windows
Meet Microsoft WHQL USB Smart Card Reader requirements
Meet US Federal Information Processing Standards (FIPS) Publication 201 requirements on smart card reader interoperability
Support T0, T1 protocol
Support I2C memory card, SLE4418, SLE4428, SLE4432, SLE4442, SLE4436, SLE5536, SLE6636, AT88SC1608, AT45D041 card and AT45DB041 card via external EEPROM
Support ISO7816 Class A, B and C (5V/3V/1.8V) card
Implemented as an USB full speed device with bulk transfer endpoint, Mass Storage endpoint
Built-in PLL for USB and Smart Card clocks requirement
Support EEPROM for USB descriptors customization (PID/VID/ iManufacturer/ iProduct/Serial Number), Direct Web Page Link, and accessing memory card module.
EEPROM programmable via USB interface
Support software update for memory card module
Support Direct Web Page Link via configuration in external EEPROM
Support short APDU and extended APDU
Compatible with Microsoft USB-CCID driver
Support remote wake up through inserting card/removing card
Support USB selective suspend
Support Power Saving Mode (Using one pin to select between Normal/PWR Saving Mode)
Access LED

USB9560SC2 Module
Unit price: USD 50.

USB9560SC2 PCBA
(Smart Card Reader module) x1

Y05-U02-060
(USB Dupont to 5PIN Cable) x1