|
2
|
UM31A PCBA
Unit price: USD 60
|
|
|
|
The UM31A adapter is designed for desktop/Embedded system that converts 3G/4G/5G wireless Mini-Card Rev 2.1 to USB 3.1 port.
You can insert your USB type minicard such as GSM, HSPA(3.5G), GPS, LTE, 5G cards to this adapter then plug to USB port. As standard SIM card is provided, you can connect to network carrier with SIM card.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
17
|
PE3B
Unit price: USD 130
|
|
|
|
This PE3B passive adapter allows you to use your existing PCI express mini-Card in the ExpressCard Standard slot
Add SIM socket for 3G minicard and add DC jack for external power source. |
|
18
|
PE3A
Unit price: USD 100
|
|
|
|
PE3A is passive adapter to useexisting PCI-Express Add-in-Card or USB3.0 device in the ExpressCard2.0 Standard slot.
The ExpressCard 2.0 Standard supports the latest versions of the PCI Express and USB3.0 SuperSpeed USB specifications by offering transfer rates of up to 5Gbps. The ExpressCard 2.0 Standard supports backward compatibility with previously released products.
Edge-Free PCIe x1 connector is used for PCIex4, x8 and x16 cards.
External power input from FDD 4pin power connector is supported.
On-board switch can switchExpressCard 2.0 / 1.0 mode for USB3.0 |
|
|
19
|
SDP5250
Unit price: USD 200
|
|
|
|
The SDP5250 is a PCI Express revision 2.1 compliant card reader controller that integrates PCI Express
Transceiver, regulators and memory card access units into adapter.
The SDP5250 can support
Secure Digital High CapacityTM (SDHC),Secure Digital eXtended CapacityTM (SDXC).
The SDP5250 fully supports SD UHS-I(Ultra High Speed-I) and SD UHS-II (Ultra High Speed-II) FD/HD mode.
The SDP5250 integrates 3.3V to 1.8V and 3.3V to 1.2V regulators and MOSFET for card power switch and, could dramatically reduce the system BOM cost.
The SDP5250 is fully compliant to Intel Skylake 1.8V PCIe sideband signal (PERST#, CLK_REQ#,WAKE#).
Support Realtek wifi sdio module.
* Note: Qualcomm / Marvell sdio module Cannot support. |
|
20
|
R33SR-050A
Unit price: USD 72
|
|
|
|
R33SR-050A is PCIe x16 Edge Connector Extension Adapter cable,
The ribbonized format of the axial cable provides a dense and flexible solution without signal attenuation for high speed PCIe Gen3 8Gbps Data Transaction, bidirectional 256Gbps (256GT/sec) for PCI x16, and 16Gpbs (16GT/sec) per PCIe lane. |
|
|