The Cost effective industrial wireless LAN solution

Introduction of Products

BOINTEC CUB805-K is a WLAN module supporting IEEE 802.11 b/g/n standards with 6-pin connector supporting USB 2.0 /1.1 interface.
This is a small form factor and low cost compact WLAN module designed for the wireless connectivity of products with embedded system.
This module operates in 2.4GHz ISM frequency band, it applies a highly integrated MAC/BBPand RF single chip RT5370 with 150Mbps PHY rate supporting.
This module can be built-in other embedded applications such as IP Camera, IP set top box, GPS, Internet radio apparatus,it can be directly soldered on a main PCB.

Bointec CUB805-K implements half-duplex OFDM, CCK and DSSS base-band processing supporting IEEE 802.11b/g/n data rates. The MAC supports the IEEE 802.11 wireless MAC protocol as well as 802.11i security, receive and transmit filtering, error recovery, and quality of service (QoS).
CUB601-K also supports software based Wi-Fi Protected Setup (WPS). Simply enable the WPS feature from the WIFI software and your device will automatically setup the WIFI security with a compatible WPS wireless router. Setting up a secure wireless network has never been so easy.

Product Highlight

---

• 1T1R Mode with 150Mbps PHY Rate for Both Transmit and Receiving.
• Legacy and High Throughput Modes
• 20MHz/40MHz Bandwidth
• Reverse Direction Grant Data Flow and Frame Aggregation
• WEP 64/128, WPA, WPA2,TKIP, AES
• QoS-WMM, WMM-PS
• WPS,PIN,PBC
• Multiple BSSID Support
• USB 2.0 bus, miniPCI express mechanical interface
• International Regulation - 802.11d + h
• Diversity, 2 IPEX antenna
• Low Power with Advanced Power Management
• Operating Systems - Windows XP 32/64, 2000, Vista 32/64 , Linux, Macintosh, Win CE6.0/7.0

• Bointec CUB805K (IEEE 802.11b/g/n Wi-Fi USB industrial module) brief download
• Drivers download