UH24A is designed for USB2.0 to 2 or 4 port USB2.0 Hub.
It’s design for embedded system to extend 4 port USB2.0 by using the GL852G MTT controller.
|
|
Function
- Compliant to USB Specification Revison 2.0
- On-chip 8-bit micro-processor
- Multiple Transaction translator(MTT)
- Each downstream port supports two-color status indicator, with automatic and manual modes compliant to USB specification Revision 2.0
- Support both individual and gang modes of power management and over-current detection for downstream port
- Conform to bus power requirements of USB 2.0 specification
- Automatic switching between self-powered and bus-powered modes
- Integrate USB 2.0 transceiver
|
Specification
- Model Name: UH24A
- Host: USB 2.0
- Device: 2.54mm/2X5 Pos Female Header
- Operation Temperature: (Commerce Grade) : 0~+70℃
- Dimension (Maximum): L*W*D=65*29*15.6(mm)
- Weight: ≒10g
|
|
|
PUN2A (M.2 B Key USB Type 4G / 5G module to USB 3.2 Gen1)
PUN2A adapter is designed for Desktop/Laptop PCs that converts 4G/5G wireless M.2 Card to USB3.0
Insert your M.2 card with 5G/4G/LTE/HSPA(3G), global positioning system, and LTE functions to this adapter card, and then through the USB3.0 port.
Dual Standard SIM card Push & Push connector is provided.
PUN2A supports maximum 6W power consumption.
|
|
Function
- USB3.0:Pitch 2.54mm/2X5 Pos/Male Header
- M.2 B Key Slot H=3.0mm or 4.0mm
- Support 3030/3042/3050/3052 M.2 B Key
- Support Dual SIM card M.2 LTE module
- Clam shell Type SIM card socket
- Wireless enable /disable SW
- High quality connectors for long service life
|
Specification
- Model Name: PUN2A
- Host: USB3.0 /2.54mm/2X5 Pos Male Header
- Device: M.2 B Key
- Operation Temperature: (Commerce Grade) : 0~+85℃
- Dimension (Maximum): L*W*D=91.7*32.1*19.2(mm)
- Weight: ≒10g
|
|
|
PUM3A (mPCIe card USB Type 4G / 5G module to USB 3.1 Gen1)
PUM3A adapter is designed for desktop/Embedded system that converts 4G/5G wireless mPCIe Rev 2.1 (USB Type) to USB 3.0 port.
You can insert your USB type mPCIe such as GSM, HSPA (3.5G), GPS, LTE, 5G cards to this adapter then plug to USB port.
As standard SIM card is provided, you can connect to network carrier with SIM card.
PUM3A supports maximum 6W power consumption.
|
|
Function
- USB3.0:Pitch 2.54mm/2X5 Pos Male Header
- Support mPCIe version 2.1 USB Type
- Support Full / Half mPCIe dimension
- Support Dual SIM card mPCIe LTE module
- Clam shell Type SIM card socket
- Wireless enable /disable SW
- High quality connectors for long service life
|
Specification
- Model Name: PUM3A
- Host: USB3.0 /2.54mm/2X5 Pos Male Header
- Device: mPCIe 2.1 USB Type only
- Operation Temperature: (Commerce Grade) : 0~+70℃
- Dimension (Maximum): L*W*D=91.7*32.1*19.2(mm)
- Weight: ≒10g
|
|
|