Home > Product > M.2 (NGFF) interface > Samsung PM961 Series
  PM961 Series
(M.2 PCIe Gen3 SSD)


   PM961 Series (NVMe)

Unit price: USD 81.
Capacity1) 128GB
LBA2) 250,069,680

Warranty Policy:
Our web shop follow Samsung Warranty Policy.
The warranted period will be count 12 Months after SAMSUNG production date.
Customer are responsible for the freight shipping back and forth.

Hotfix for windows 8.1

Hotfix for windows 7, server2008 R2

Heat Sink 2x1.5cm
Unit price: USD 2.
Heat Sink 2x1.5cm 5pcs

   PM961 Series (NVMe)

Drive Performance
Parameter Unit Queue Depth 128GB
Sequential Read2)
(Up to)
MB/s QD = 32 2800
Sequential Write2)
(Up to)
MB/s QD = 32 600
Random Read3)
(Up to)
IOPS QD = 1 10K
IOPS QD = 32 140K
Random Write3)
(Up to)
IOPS QD = 1 40K
IOPS QD = 32 40K
1) Performance measured using CDM 5.0.2 on Windows 8.1 64bit. Actual performance may vary depending on use conditions and environment
2) Sequential performance measured using 128KB data size. (QD=32 by Thread=1)
3) Random performance measured using 4KB data size. (QD=32 by Thread 4, QD=1 by Thread 1)
4) Performance measurements based on TurboWrite technology



Maximum Ratings
Parameter Specifications
Supply Voltage Allowable voltage 3.3V ± 5%
Allowable noise/ripple 100mV p-p or less

Power Consumption for M.2 (3.3V Supply)
Parameter Specifications
Power Consumption Active1 (Typical, RMS) Read 6.1W
Write 5.1W
Idle2 (Typical) 450mW
L1.23 (Typical) 5mW
1) Active power is measured on sequential write and read.
2) Idle Power is measured on Idle status with L0+APST on.
3) If L1.2 time logging option is enabled, L1.2 Power could be 5mW.


MTBF is Mean Time Between Failure, and is the predicted elapsed time between inherent failures of a system during operation. As same word,
AFR (annual failure ratio) is 0.4%. MTBF can be calculated as the arithmetic average time between failures of a system.
MTBF Specifications
Capacity MTBF
128GB 1,500,000 Hours


UBER is Uncorrectable Bit Error Rate.
UBER Specifications
Parameter Specification
UBER < 1 sector per 1015 bits read

Environmental Specification

Temperature, Humidity, Shock, Vibration
UBER Specifications
Parameter Mode Specification
Temperature (Tc) Operating1) 0°C to 70°C
Non-operating -40°C to 85°C
Humidity2) Non-operating 5% to 95%
Shock3) Non-operating 1500G
Vibration4) Non-operating 20G
1) Temperature is measured by SMART Temperature. Proper airflow recommended
2) Humidity is measured in non-condensing
3) Test condition for shock: 0.5ms duration with half sine wave
4) Test condition for vibration: 10Hz to 2000Hz

Physical dimensions and Weight

Parameter Value
Width 22.00 ± 0.15 mm
Length 80.00 ± 0.15 mm
Thickness Max. 2.38 mm
Weight 128GB Max 8g


   Product Category

Flag Counter
Any of the trademarks,used or cited in the website of the Bplus Technology Co., Ltd. are the property of their respective owners.
Copyright©2009-2018 Bplus Tech. Corporation. All Rights Reserved
mini card rev 2.1 mini card 2.1 PCIe3.0延長線 PCIe 3.0延長線 PCIe延長線 PCIe3延伸線 PCIe 3.0延伸線 PCIe延伸線 PCIe Gen3 PCIe Gen3.0 PCIe 3.0 PCIe extender Internet of Things 物聯網 IoT FPC CFast MO-297 Half-Slim MO-300 i-SD i-TF Industrial Flash Storage USB 3.1 SD4.0 SD 4.0 SFF-8639 U.2 M.2 NGFF MiniCard Adapter  SD 4.0   SD4.0 Extender Board34/54mm ExpressCard Adapter micro SATAMini PCI-E  PCI-E Adapter mPCIe  USB 3.0Add-On-Card Enclosure mSATA SSD mSATAExtension Cable Expansion USB3.0 802.11n 802.11ac LTE Adapter LTE 802.16emetal bracket PCB to convert PCI Express Half Mini CardHalf Mini Card into Full Mini Card 802.11d 802.11e 802.11h 802.11i H.264 DVRCFAST SD to SATA SD to SATA RAID 連接器 適配器 延伸板 擴展板 讀卡器 配接器 迷你卡 DIY BOX eGPU GAME 天線 轉接卡