BOINTEC CPE803-K is a WLAN module supporting IEEE 802.11 b/g/n standards with 6-pin connector supporting USB 2.0/1.1 interface. This is a small form factor and low cost compact WLAN module designed for the wi rel e s s co nne ct I v I ty of0 produ cts with embedded system. This module operates in 2.4GHz ISM frequency band, it applies a highly integrated MAC/BBP and RF single chip RIS370 with 150Mbps PHY rate supporting. This module can be built-in other embedded applications such as IP Camera, IP set top box, GPS, Internet radio apparatus,it can be directly soldered on a main PCB.
Bointec CUB805-K implements half-duplex OFDM, CCK and DSSS base-band processing supporting lEEE 802.11 b/g/n data rates. The MAC supports the IEEE 802.11 wireless MAC protocol as well as 802.11 i security, receive and transmit filtering, error recovery, and quality of service (QoS). CUB601-K also supports software based Wi-Fi Protected Setup (WPS). Simply enable the WPS feature from the WIFI software and your device will automatically setup the WIFI security with a compatible WPS wireless router. Setting up a secure wireless network has never been so easy. |
Product Highlight
- CMOS single chip (RT5390) with RF (PA, LNA, T/R SW,and diversity SW), Baseband,and MAC integration.
- Complies with IEEE 802.11 b/g, 802.11n (Draft 4.0)
- Dynamic data rate: 802.11 b: 1 ,2,5.5, 11 Mbps; 802.11 g: 6,9,12,18,24,36,48,54Mbps
802.11 n: (20M Hz) MCS0-7, up to 72Mbps;(40MHz) MCS0-7, up to 150Mbps
- Security support for 64/128 WEP, WPA, WPA2
- QoS: WMM & WMM-PS
- Cisco CCX 5.0 support
- Operates in 2.4GHz frequency bands.
- Antenna configuration: one I-PEX receptacle for external antenna.
- Drivers supporting Windows XP / Vista,2K, Mac OS X and Linux.
|
